Spirella Card

Spirella Card Leane de Graaf
Materials:

1. Paper: yellow
2. Stencil: embossing stencil nr. 262
3. Sticker: lines
4. Spirella wheels white nr. 947Thread: gold, copper
5. Glue
6. Silicone glue
7. Patttern spirella wheel

Directions
Spirella wheel:

1. Take the shape out of the die cut card.
2. Write the numbers on the back of the shapes using a pencil. Mark the numbers anti clockwise because you are working at the back of the shapes 
3. Secure the yarn at the back of the shape. Direct the thread through the groove number 1 to the front of the shape. 
4. Wind the thread over the front of the shape to number 15. Go to the back, move to the next groove, number 2. Wind over the front to groove 16. Work clockwise, until completed. 
5. When completed secure the thread with tape.
6. Take the second color. Secure the yarn with tape.
7. Direct the thread through the groove number 1 to the front of the shape. Wind the thread over the front of the shape to number 13. Go to the back move to groove 2. Go on until you are completed. 
8. When completed secure the thread with tape.
9. Take again the gold thread. Secure the yarn with tape. 
10. Direct the thread through the groove number 1 to the front of the shape. Wind the thread over the front of the shape to number 10. Go to the back move to groove 2, wind to number 11 etc. Go on until you are completed. 
11. Finally secure the thread again with tape.
12. Fold a yellow card (18 x 13 cm) in half. 
13. On the back, draw a pencil line 0,5 cm from the edges. Use this as a guide to embos two lines. 
14. Stick a sticker line in between the embossed lines.
15. Position and glue the Spirella wheel to the card.

You will find more ideas in the books: "Spirella Greetingcards" ISBN: 90-5945-030-2 and "Spirella Greetingcards with silhouettes" ISBN: 90-5945-039-6 by Leane de Graaf